Dalsa Piranha4 User Manual page 69

Full Name Reset Camera
Mnemonic rc
Argument(s)
Description Resets the camera to the saved user default settings. These settings are
saved using the usd command.
Notes
Full Name Reset Flatfield Coefficients
Mnemonic rpc
Argument(s)
Description Reset all user FPN values to zero and all user PRNU coefficients to one
Notes
Full Name Set Baud Rate
Mnemonic sbr
Argument(s) Baud rate
Description Set baud rate
Notes
Full Name Direction
Mnemonic scd
Argument(s) Direction
Description Set sensor scan direction
Notes
Full Name Exposure Mode
Mnemonic sem
Argument(s) Mode
Description Set exposure time mode
Notes •
•
Piranha4 8K Color Camera User's Manual
• Send command and then change speed of HyperTerminal
In internal mode the exposure time is controlled by the SET
command
SEM 1 overrides internally generated independent exposure times
9600
19200
38400
57600
115200
0. Forward
1. Reverse
2. External – controlled by CC3 signal
0. Internal
1. External
Appendix B: ASCII Commands • 69