Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Related Manuals for Logosol 230
Summary of Contents for Logosol 230
- Page 1 Manual Logosol Log House Moulder 230 Swedish Wood Processing Products...
-
Page 2: Table Of Contents
Printed on chlorine-free, recyclable paper, using vegetable-oil based inks. LOGOSOL is constantly developing its products. For that reason we reserve the right to make changes in the design and construction of our products. Text and illustrations: Mattias Byström Document: Log House Moulder-SE-11-05-2006 Manual, article no. -
Page 3: Safety Instructions
Safety Instructions may only be carried out by an authorized electrician, who also has to contact Logosol before opening the machine’s electric system. This applies to both the electric and the chainsaw driven milling cutter: When used • Make sure that the cable lies in the cable channel/... -
Page 4: Mounting Of Chainsaw
Mounting of Chainsaw Empty the chainsaw’s chain oil tank and run the chainsaw reducers’ counter nuts. Put on the Poly-V belt over until all remaining oil has been pumped out. Fill the the belt pulleys. Make sure that the belt lies correctly chainsaw’s fuel tank before mounting it on the Log in all grooves. -
Page 5: Mounting Moulding Knives
Note that the knives of the chainsaw powered Log Mounting Moulding Knives House Moulder are mounted inversely in the cutter head. Before opening the milling cutter’s cover, make sure the electric supply is disconnected / the chainsaw is turned off and the cutter stands still. Always mount the moulding knives in pairs so they are opposite each other. -
Page 6: Carriage Plate
The carriage plate also allows a 5 mm larger knife protrusion without the knives coming into contact with the log supports of the Logosol Sawmil. The Feed Crank If the Log House Moulder is in its outermost position on the carriage plate, your hand can hit against the carriage plate when turning the feed crank. -
Page 7: Starting The Log House Moulder
The Log House Moulder is available in a design compatible 4. Turn the log over so the bottom with Logosol’s feeding machine E37, which also runs the side is up. Fit the knives for the cutting unit. The hand-fed electric Log House Moulder can long-groove in the cutter head. -
Page 8: Maintenance
· Make sure that the electrical equipment and all cables log fences on the Logosol Sawmill. Fit C-clamps over the are undamaged. log and and the versatile log fences at the log ends. This will also give a smoother surface. -
Page 9: Moulding Knives
Moulding Knives Sharpening Applies to both moulding knives and planing knives: Logosol has produced a wide range of moulding knives Always sharpen the knives in pairs to ensure that they especially suitable for the Log House Moulder. They are have the same weight. Otherwise, vibration may occur in all presented in Logosol’s Moulding Knives Catalogue. -
Page 10: Technical Data
Vibration reducer M8 before opening the system. xxxx-xxx-xxxx Support ball bearings 8x22x10 Declaration of Conformity The manufacturer Logosol AB, Industrigatan 13, S-871 53 Härnösand, Tel. +46 611 18285, hereby declares that Log House Moulder, with art. no. 7600-000-0230, 7610-000-0230, or... -
Page 11: Timbering Course
Logosol arranges timbering courses where you spend one week learning how to shape logs and build log houses. The scarfed corner in the photo above, is made by course participants. The courses are from Monday to Friday. For more information, contact Logosol or visit our website. - Page 12 S p a r e s y o u r back and makes you stronger! Full control of the log, even when you take a new grip. Swedish Wood Processing Products LOGOSOL Sweden Industrigatan 13 SE-871 53 HÄRNÖSAND Tel. 0611-182 85 Fax 0611-182 89 www.logosol.se info@logosol.se LOGOSOL Norway Nedre-Steinstad, Röra...
Need help?
Do you have a question about the 230 and is the answer not in the manual?
Questions and answers