Transport And Place Of Erection; Storage; Workbench - GARANT 925421 Instruction Manual

GARANT GridLine workbench, self-propelled with electric drive
The operating company must ensure that personnel who work on the product comply with the
regulations and provisions together with the following instructions:
 National and regional regulations for safety, accident prevention and environmental protection
regulations.
 No damaged products are assembled, installed or commissioned.
 The necessary protective equipment is provided.

3.7. TRANSPORT AND PLACE OF ERECTION

en
Immediately on receipt check the product for damage in transport. Damaged products must not
be installed or commissioned.
CAUTION
Improper transport to the place of erection
The workbench has a high tare weight - risk of injury if lifted improperly.
» Wear safety shoes and safety gloves.
» Make sure the paths for movement and transport are clear.
» At least two persons must be employed to transport the workbench to the erection location.
» Ensure during movement and transport that all drawers and cupboard doors are closed and
locked.
Make sure that no components are damaged or destroyed during transport and handling.
NOTICE
Improper transport
Damage due to improper transport.
» Use only suitable lifting gear for transporting the workbench to the erection location.
» Do not attach lifting gear to the worktop in order to lift the workbench.
» Do not pull the workbench across the floor.
» Keep the workbench horizontal during transport.
» Put the workbench down gently.

3.8. STORAGE

3.8.1. Workbench

 Storage temperature between -10°C and +40°C.
 Store in an enclosed dry room.
 Atmospheric humidity: 90 %, non-condensing.
90 Instruction manual