c.) RPM only (miles)
f.) RPM only (kilometers)
Note: If the desired display is not the default, it will need to be selected after each power-up.
Changing Resistance Levels
Push the Resistance Level Increase( ) or Decrease( ) buttons to change the resistance level at any time in a workout
program.
Pausing or Stopping
2. To continue your workout, push START or begin pedaling.
Muting the Console
Note: The Console will reset to the default (not muted) after each power-up.
Workout Summary Mode
tance, Time, and Calories) are constantly displayed. The Console will cycle between the other Workout Summary values
every 3 seconds:
Note: If no Heart Rate was provided during the workout, the Console will not report a value.
-
25