Operator Level Menus - ABB ControlMaster CM10 Commissioning Instructions

18 C O N T R O L M A S T E R C M 1 0 | U N I V E R S A L P R O C E S S C O N T R O L L E R , 1/8 D I N | C I/C M 1 0 - E N R E V. C

6 Operator level menus

Autotune
Adjust
Setpoint Select
Alarm Acknowledge
Autotune
Adjust
Setpoint Select
Alarm Acknowledge
View Select
Enter Advanced Level Displays the Access Level selection views.
Operator level menus are used to adjust setpoint(s) and output(s), select setpoints,
select the view and to enter Basic and Advanced modes (via the Access Level).
To access Operator Level menus:
1 From the Operator Page, press
2
Use the
3
Press to expand menu levels and to select menu options or press
to the previous menu.
Used to start or stop an Autotune routine.
This menu is enabled only if Autotune mode is On.
Enables a value to be adjusted using the
The icon next to a value indicates the current adjustable selection.
Selects the local setpoint to be used
(displayed only if more than 1 local setpoint is configured).
Acknowledges any active but unacknowledged alarms.
Selects the Operator view to be displayed.
to view the available menus.
and keys to scroll through the menus and menu options.
and keys.
to return