Cardinal 225NEST Operation Manual page 43

Set Display Mode
<lf>XEx<cr>
Command:
x
is the letter
is to be set to minimum-maximum mode.
to signals minus zero reference mode.
Response (valid mode):
x
is the letter
minimum-maximum mode.
reference mode.
Response (invalid mode):
Get Display Mode
<lf>Xe<cr>
Command:
<lf>MODE=x<cr>
Response:
x
is the letter
minimum-maximum mode.
reference mode.
Set DAC Output Value
<lf>XDxxxxx<cr>
Command:
xxxxx
represents the value the DAC will be set to (in the range 0 to 16383).
Response (DAC value in range):
xxxxx
represents the value the DAC is set to (in the range 0 to 16383).
Response (DAC value out of range):
Get DAC Setting
<lf>Xd<cr>
Command:
<lf>DAC=xxxxx<cr>
Response:
xxxxx
represents the value the DAC is set to (in the range 0 to 16383).
M
if the display is to be set to signals mode.
<lf>MODE=x<cr>
M
if the display is in signals mode.
<lf>?<cr>
M
if the display is in signals mode.
<lf>DAC=xxxxx<cr>
4400-0020-0M Rev C  225NEST Operation
x
is the letter
x
is the letter
x L
is the letter if the display is in signals minus zero
x
is the letter
x L
is the letter if the display is in signals minus zero
<lf>?<cr>
x X
is the letter if the display
L
if the display is to be set
X
if the display is in
X
if the display is in
37