DXV LS SpaLet AT200 User Manual

DXV LS SpaLet AT200 User Manual

Hide thumbs Also See for LS SpaLet AT200:

Advertisement

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the LS SpaLet AT200 and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Summary of Contents for DXV LS SpaLet AT200

  • Page 2 TABLE OF CONTENTS...
  • Page 3 TABLE OF CONTENTS...
  • Page 4: Important Safeguards

    Unplug immediately. In the event that an accident occurs as a result of WARNING improper usage, DXV will assume no responsibility for damages. Risk of burns, electric shock, fires and/ or personal injury: This product is assumed to be used by persons, such...
  • Page 5 GUARDS IMPORTANT SAFE BE SURE TO FOLLOW THE – Children GROUNDING INSTRUCTIONS: – Elderly persons This product should be grounded in the event of an electrical short circuit, grounding reduces – Persons with an illness the risk of electric shock by providing an –...
  • Page 6 GUARDS IMPORTANT SAFE BE SURE TO FOLLOW THE Be mindful of the following when handling CAUTION batteries: Risk of minor injuries and property – Do not store batteries carelessly together with damage: other metal objects (necklaces, hair pins etc.). For care of the plastic parts, –...
  • Page 7 GUARDS IMPORTANT SAFE BE SURE TO FOLLOW THE Do not supply the SpaLet with a hot water, or ® This product is not intended to be used by do not expose the SpaLet to any impact. There children aged under 8 years old, persons is a risk of injury from damaged parts.
  • Page 8: Handling Precautions

    PRECAUTIONS FOR PREVENTING FAILURE HANDLING PRECAUTIONS Do not expose the SpaLet to direct ® sunlight. It can cause discoloration of the plastic parts. Direct sunlight can furthermore lead to the remote control and the sensor not working properly. Do not open and close the SpaLet seat or lid roughly.
  • Page 9: Main Unit

    INTRODUCTION CONTROL AND BUTTONS ■ MAIN UNIT seat lid (Pages 15, 20, 37-40) SpaLet ® 2. Upper body sensor 3. Lower body sensor, seating sensor 4. SpaLet seat (Pages 15, 20, 37-40) 5. Dust filter of the odor absorption cartridge (Page 43) 6.
  • Page 10 INTRODUCTION ■ WATER SHUTOFF VALVE 1. Water shutoff valve (Pages 10, 14, 46, 47) 2. Strainer (Pages 10, 46, 47) 3. Open/close handle (Pages 14, 46, 47) NOTES: • The open/close handle is used when stopping the washing water. Be sure that it is fully opened. •...
  • Page 11: Remote Control

    INTRODUCTION ■ REMOTE CONTROL 1. SpaLet seat open/close button 2. Flush (full) button 3. Flush (light) button 4. Screen The screen changes according to usage. 5. Power/home button Turns on/off, or goes to the home menu. 6. Set/next button Changes the screen display. 7.
  • Page 12: Error Message

    INTRODUCTION HOME MENU DURING WASHING Posterior Washing Feminine Washing ERROR MESSAGE Replace the battery. Replace the battery. During the power-OFF During the power-OFF -Slide up the remote -Slide up the remote control and replace the control and replace the Press the power button. Press the power button.
  • Page 13 INTRODUCTION HOME MENU Press the Press the (set/next) button (set/next) button Press the buttons below the screen SPRAY STRENGTH Each press changes the The corresponding setting is display from [SETTING 1] to displayed. DRYER SEAT WATER TEMP TEMP TEMP DRYER [SETTING 5].
  • Page 14: Preparation Before Use

    INTRODUCTION PREPARATION BEFORE USE ■ CHECKING THE WATER SHUTOFF VALVE AND POWER Before using the for the first time, check the following items. SpaLet ® 1. Open the water shutoff valve. Water shutoff valve Water shutoff valve OPEN OPEN Open/close handle Open/close handle •...
  • Page 15: General Use

    HOW TO USE GENERAL USE ■ BASIC OPERATIONS OPENING THE SpaLet SEAT LID / SpaLet SEAT ® AUTO MANUAL The lid opens automatically when you stand in front of the SpaLet. The seat opens by pressing (open/close) button on the remote control. PRE-WASH When you sit on the seat, a small amount of water washes the bowl to minimize stain accumulation.
  • Page 16: How To Use

    HOW TO USE ■ WASHING WITH THE SpaLet ® Posterior washing button: Washes posterior part Posterior washing-gentle button: Washes posterior part gently Feminine washing for women: Washes feminine part ■ Stop button: Stops washing 5. Spray strength adjust button (+/-): Adjusts spray pressure (6 levels) during washing 6.
  • Page 17 HOW TO USE HINT • The washing function cannot be operated without sitting on the seat. SpaLet ® • The bidet automatically stops after 2 minutes. However, this function can be extended up to 6 minutes when the massage function is used during washing. •...
  • Page 18 HOW TO USE ■ DRYING WITH WARM AIR 1. Dryer: Press the button below this indicator to use dryer function. 2. Dryer temp: Press the button below this indicator while using the dryer function to adjust the dryer temperature. High (Approx. 56°C/133°F) Medium (Approx.
  • Page 19 HOW TO USE ■ AUTO FLUSH FUNCTION Flushes the SpaLet automatically. You can change the flush delay setting. ® SETTING 1 SETTING 1 AUTO AUTO AUTO OPEN AUTO OPEN FLUSH FLUSH /CLOSE /CLOSE 6SEC 6SEC ONLY LID ONLY LID 1. Press the (set/next) button repeatedly until the Setting 1 screen appears.
  • Page 20 HOW TO USE ■ AUTO SEAT/LID OPEN AND CLOSE FUNCTION You can set the automatic opening/closing function of the SpaLet seat lid and the SpaLet seat. ® SETTING 1 SETTING 1 AUTO AUTO AUTO OPEN AUTO OPEN FLUSH FLUSH /CLOSE /CLOSE 6SEC 6SEC...
  • Page 21 HOW TO USE ■ ADJUSTING THE SpaLet ™ SEAT TEMPERATURE 1. Seat temp: Press the button below this indicator to adjust the seat temperature. Off (Room temperature) Low (Approx. 28°C/82.4°F) High (Approx. 36°C/ 96.8°F)
  • Page 22: Useful Operations

    HOW TO USE USEFUL OPERATIONS ■ PRE-WASH When the user sits on the SpaLet seat, a premist wets the bowl with a small amount of water to help ® prevent dirt buildup. SETTING 2 SETTING 2 CLEAN- CLEAN- NIGHT NIGHT PRE WASH PRE WASH LIGHT...
  • Page 23 HOW TO USE ■ POWER SAVE You can reduce power consumption by turning the seat heater off for 8 hours during times when the SpaLet is not being used (e.g. during the night). ™ SETTING 3 SETTING 3 SETTING 3 POWER POWER POWER...
  • Page 24 HOW TO USE ■ PLASMACLUSTER ION There are two modes for the plasmacluster ion function: Plasmacluster Ion (SpaLet Bowl) ® and Plasmacluster Ion (Room). SETTING 3 SETTING 3 POWER POWER ODOR ODOR BLUE BLUE SAVE SAVE ABSORPTION ABSORPTION LIGHT LIGHT O F F O F F O F F...
  • Page 25 HOW TO USE PLASMACLUSTER ION (ROOM) Plasmacluster ions (both positive and negative ions) are released throughout the SpaLet room ® once a day to refresh the SpaLet room by the synergistic effect with the deodorizer. Plasmacluster Ion (Room) works as follows. •...
  • Page 26 HOW TO USE ■ PLASMACLUSTER ION FOR BLUE LIGHT (SpaLet BOWL) ® When Bowl or Room is selected for the plasmacluster ion function, a blue light illuminates the inside of the bowl when the user is detected or SpaLet seat lid is opened. You can turn the blue light off. SETTING 3 SETTING 3 POWER...
  • Page 27 HOW TO USE ■ BUTTON OPERATION SOUND You can turn off the button operation sound of the remote control. SETTING 4 SETTING 4 SEAT SEAT KEYPAD KEYPAD STOP STOP HEATER HEATER SOUNDS SOUNDS AUTO OFF AUTO OFF O F F O F F 1.
  • Page 28: Restoring The Default Settings

    HOW TO USE ■ LED SETTING OF THE STOP BUTTON You can turn on or off the flashing of the ■ Stop button while the night light function is on. SETTING 4 SETTING 4 SEAT SEAT KEYPAD KEYPAD STOP STOP HEATER HEATER SOUNDS...
  • Page 29 2. Unless due to intentions or gross negligence by DXV, DXV will not be liable in any way in the event that a user suffers any form of damage due to the use of or the inability to use this application.
  • Page 30: Things You Should Know

    THINGS YOU SHOULD KNOW ■ IN CASE YOU WILL NOT BE USING THIS PRODUCT FOR A LONG TIME HOW TO DRAIN THE WATER In the following cases be sure to drain the water according to the steps below. Turn off the power breaker or remove the power plug from the outlet.
  • Page 31 THINGS YOU SHOULD KNOW — After draining the water, attach the water supply hose securely, until you hear a clicking sound. After attaching, rotate the clip and check whether it is properly secure. Pull the water supply hose lightly and confirm that it is properly secure. Bend Bend Click...
  • Page 32 THINGS YOU SHOULD KNOW IF WASHING CANNOT BE PERFORMED BECAUSE OF FREEZING If the water of a water supply hose or a part connecting to the water supply is frozen and washing cannot be performed, thaw it gradually by warming the water supply hose or the part connecting to the water supply with a cloth soaked in hot water, or heat the SpaLet room and wait until water has thawed naturally.
  • Page 33 THINGS YOU SHOULD KNOW NOTES: • Water consumption with this method is approximately 317 gallons (1200L) in a 24 hour period • When using the SpaLet again, be sure to perform “Preparation Before Use” (page 14). DRAINING THE SEAT UNIT 1.
  • Page 34 THINGS YOU SHOULD KNOW ■ FLUSHING THE SpaLet ® IN THE CASE OF POWER OUTAGE OR WATER FAILURE MANUAL FLUSHING IF A POWER OUTAGE HAS OCCURRED If a power outage has occurred, the SpaLet cannot be flushed by the remote control. Flush the SpaLet by following procedures below.
  • Page 35 THINGS YOU SHOULD KNOW 5. Attach the top cover. Top cover Top cover Make sure that the top cover is fitted completely after attaching. MANUAL FLUSHING IF THE WATER SUPPLY HAS BEEN SUSPENDED Fill a bucket with water and carefully pour the contents into the SpaLet bowl to manually flush the SpaLet ®...
  • Page 36: Cleaning And Maintenance

    CLEANING AND MAINTENANCE ■ GUIDELINES In this section, DXV offers some general guidelines as to the cleaning of this product. Please note that there are some cleaning products which should not be used. CLEANING TOOLS Type Place Soft cloth Use old towels, T-shirts, etc., cut to an appropriate size.
  • Page 37 COVERS AND REMOTE CONTROL (PLASTIC PARTS) Dampen a soft cloth and wipe the surfaces. DXV recommends cleaning the SpaLet frequently to prevent dirt buildup on the SpaLet surfaces. Wiping with a damp cloth also prevents static electricity that can attract dust particles which cause blackish contamination.
  • Page 38 CLEANING AND MAINTENANCE ■ REMOVING THE LID FOR CLEANING The seat lid can be removed easily. This is useful when cleaning the hinge that is normally hidden or cleaning the whole seat lid. NOTES: • Do not use excessive force on the seat lid, as this may damage it. •...
  • Page 39 CLEANING AND MAINTENANCE 3. Push the button part of left sliding block and lift it up to release seat lid. LIFT LIFT PUSH PUSH NOTE: • If the lock is too hard to slide, keep the power off as you close the seat lid and then open it again. 4.
  • Page 40 CLEANING AND MAINTENANCE ® ASSEMBLING THE SpaLet SEAT LID 1. Align the pin hole on the right side of the seat lid with the hinge pin on the seat, and insert the pin into the hole. NOTE: • If the seat lid does not attach to the shaft, turn off the power. Check the direction of the shaft which the seat lid will attach to.
  • Page 41 CLEANING AND MAINTENANCE ■ SpaLet BOWL (CERAMIC PARTS) ® • Clean the bowl with water or warm water, using a soft brush or sponge dampened with mild cleanser. NOTES: • Do not use chlorinated cleansers, acidic cleansers or disinfectants, as the gas vapor could damage this product or cause failures.
  • Page 42 CLEANING AND MAINTENANCE ■ NOZZLE SHUTTER/DUST FILTER OF THE ODOR ABSORPTION CARTRIDGE NOTES: • Avoid wiping with a dry cloth or toilet paper, as this cause scratches. • Avoid using an abrasive brush or cleanser. • Please note that the nozzle shutter has a top and bottom part. •...
  • Page 43 CLEANING AND MAINTENANCE CLEANING THE DUST FILTER OF THE ODOR ABSORPTION CARTRIDGE 1. Follow the procedure in "Cleaning the Nozzle Manually" to open the nozzle shutter. (Page 44) 2. Pull the dust filter of the odor absorption cartridge out. 3. Wash the dust filter of the odor absorption cartridge with running water. 4.
  • Page 44 CLEANING AND MAINTENANCE ■ NOZZLE CLEANING THE NOZZLE VIA REMOTE CONTROL To clean the nozzle while using the SpaLet (sitting on the seat) using the remote control, ® follow the procedure below. SETTING 2 SETTING 2 CLEAN- CLEAN- NIGHT NIGHT PRE WASH PRE WASH LIGHT...
  • Page 45 CLEANING AND MAINTENANCE NOTE: Both Feminine and Posterior nozzles can be removed from the extended wands to additionally clean them. Follow steps below. a) With selected wand extended, turn nozzle head counterwise about 1/2 turn. (ref fig. a) b) Carefully remove nozzle head from the extended wand to additionally clean. (ref. fig b) c) Place nozzle head into extended wand in reverse order and turn clockwise about 1/2 turn.
  • Page 46 CLEANING AND MAINTENANCE ■ CLEANING THE STRAINER (WHEN WASHING IS GETTING WEAK) If the SpaLet has been used for a long period of time and flushing or washing functions seem to be getting ® weak, clean the strainers as described in the following procedure. Generally, the strainers should be cleaned once every two years.
  • Page 47 CLEANING AND MAINTENANCE 5. Thoroughly wash the strainer or O-ring in water to remove grime. Dust catcher ring Dust catcher ring Strainer Strainer O-ring O-ring • Wash the dust catcher ring by removing it from the tip of the strainer. •...
  • Page 48 CLEANING AND MAINTENANCE ■ REPLACING THE BATTERIES OF THE REMOTE CONTROL Replace the batteries with new ones when the indicator or "Replace the battery," message is displayed on the screen. 1. Remove the screw and washer from the remote control. No.0 No.0 2.
  • Page 49: Troubleshooting

    TROUBLESHOOTING ALL FUNCTIONS NO FUNCTIONS OPERATE Electricity is not supplied. ➤➤ Check for a power failure, tripped breaker, or other probable causes. The power of the SpaLet is off. ® ➤➤ Press the Power/home button to turn on the power. The power plug is not connected to the outlet.
  • Page 50 TROUBLESHOOTING WASHING WATER DOES NOT SPRAY The water shutoff valve is closed. ➤➤ Turn the open/close handle counterclockwise fully, then turn the open/close handle clockwise 90 degrees. Rotate the water shutoff valve seven turns to fully open it. The strainer is clogged. ➤➤...
  • Page 51 TROUBLESHOOTING THE DIRECTION OF THE BIDET SPRAY IS WRONG The alignment of the nozzle tip is not in the right position. ➤➤ Align the nozzle tip correctly. (Check that the center marks of the nozzle body and nozzle tip are matched.) Center mark of the nozzle body Center mark of the nozzle body Center mark of the nozzle tip...
  • Page 52 TROUBLESHOOTING FLUSH WATER DOES NOT SPRAY Auto flush is set to Off. ➤➤ Set the Auto flush to other than Off (Page 19) The SpaLet bowl is clogged. ® ➤➤ All functions stops when the water level within the SpaLet bowl reaches the point where the water will overflow.
  • Page 53 TROUBLESHOOTING THE AIR IS NOT WARM The Dryer temp is set too low. ➤➤ Press the button below the [DRYER TEMP] indicator to adjust the temperature. (Page 18) WARM AIR STOPS SUDDENLY The drying function has been used for more than 4 minutes. ➤➤...
  • Page 54: Seat Heater

    TROUBLESHOOTING SEAT HEATER THE SpaLet SEAT IS NOT WARM ® The Plasmacluster Ion (Room) is working. ➤➤ The seat temperature does not adjust to a suitable temperature. Adjust the seat temperature. (Page 21) The power save function is on. ➤➤ Set the power save function to off. (Page 23) The Plasmacluster Ion (SpaLet Bowl) is working.
  • Page 55 TROUBLESHOOTING PLASMACLUSTER ION (ROOM) PLASMACLUSTER ION (ROOM) DOES NOT WORK ION is set to Off or Bowl. ➤➤ Set ION to Room. (Page 24) Auto open/close is set to Off, and the SpaLet seat is closed. ® ➤➤ Set Auto open/close to other than Off (Page 20) The SpaLet is being used at the time when the Plasmacluster Ion (Room) operates.
  • Page 56: Specifications

    SPECIFICATIONS Rated voltage / Frequency power AC120V 60 Hz. Rated power consumption 850 W (environment 20°c/68°f, water 15°c/59°f) Maximum power consumption 1300 W (environment 20°c/68°f, water 3°c/37.5°f) Required minimum water pressure 0.1 MPa (1.0 bar):14.5 psi (When flows) Feed-Water Pressure Maximum water pressure 0.75 MPa (7.5 bar): 109 psi (Hydrostatic pressure) Operating Temperature Range...
  • Page 57 SPECIFICATIONS Dimension W 260 × D 33 × H 73 mm, W 10.3" x D1.3" x H2.9" Battery AA cell battery: 2 - piece Remote Control Transmission System Electric wave (Bluetooth ® Display Device LED Screen Power cord (supplied item) Effective length 1.0 m, 39", power plug type B The specification of this product is for use in country or region where this product is sold.
  • Page 58 NOTES...
  • Page 59 NOTES...

Table of Contents

Save PDF