Routing Cables Through Waterproof Connectors - Huawei SUN2000-45KTL-US-HV-D0 User Manual

SUN2000-45KTL-US-HV-D0
User Manual
----End
Installing the Tube Fitting (Using COM/RESERVE as an Example)
Step 1 Remove the cable gland and cap from the waterproof connector, and then remove the
waterproof connector.
Step 2 Secure the tube fitting to the chassis using the nut delivered with the tube.
Figure 5-5 Installing the tube fitting (using COM/RESERVE as an example)
----End

5.3 Routing Cables Through Waterproof Connectors

Context
This section describes how to route an AC power cable through the AC OUTPUT waterproof
connector.
Procedure
Step 1 Route the cable through the waterproof connector.
Issue 02 (2017-09-15) Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
5 General Operation
34