Huawei SUN2000-45KTL-US-HV-D0 User Manual page 43

Hide thumbs Also See for SUN2000-45KTL-US-HV-D0:

Table of Contents

SUN2000-45KTL-US-HV-D0

User Manual



Procedure

Step 1 Partially loosen the two screws on the maintenance compartment door.

Figure 6-1 Loosening screws

Step 2 Open the maintenance compartment and use the support bar to stabilize the door.

Issue 02 (2017-09-15)

Never open the Host panel cover of the SUN2000.

Before opening the maintenance compartment door, disconnect the AC and DC power

supplies. For processes of disconnecting the power supplies, see

SUN2000. After powering off the SUN2000, wait at least 5 minutes and then perform

operations on the SUN2000.

If you need to open the maintenance compartment door on rainy or snowy days, take

protective measures to prevent rain or snow entering the maintenance compartment. If it is

impossible to take protective measures, do not open the maintenance compartment door in

rainy or snowy days.

Do not leave extra hardware in the maintenance compartment.

If the screws on the chassis door are lost, obtain spare screws from the fitting bag bound to the inductor

cover at the bottom of the chassis.

Huawei Proprietary and Confidential

6 Electrical Connections

7.4 Powering Off the

Table of Contents