Table of Contents
Advertisement
SUN2000-45KTL-US-HV-D0
User Manual
Figure 6-23 Stripping an RS485 communications cable
Step 2 Remove the cable terminal base from the terminal block. Connect the communications cable
to the terminal base.
Figure 6-24 Connecting cables to a terminal base
(1) RS485A IN
(3) RS485B IN
Step 3 Route the cable through the waterproof connector.
Step 4 Land the cables in the terminal block, and bond the shield layer to the ground point.
When connecting the shielded cable, crimp the OT terminal if required.
Issue 02 (2017-09-15)
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
(2) RS485A OUT
(4) RS485B OUT
6 Electrical Connections
57
Advertisement
Table of Contents
