SUN2000-45KTL-US-HV-D0
User Manual
5.1 Crimping the OT Terminal
Figure 5-1 Crimping an OT terminal
(1) Cable
Issue 02 (2017-09-15)
Pay attention not to damage the core wire when stripping a cable.
The cavity formed after the conductor crimp strip of the OT terminal is crimped must wrap
the core wires completely. The core wires must contact the OT terminal closely.
Wrap the wire crimping area with heat shrink tubing or PVC insulation tape. The
following figure uses heat shrink tubing as an example.
When using the heat gun, protect devices from being scorched.
(2) Heat shrink tubing
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
5
General Operation
(3) OT terminal
(4) Hydraulic pliers
5 General Operation
(5) Heat gun
31