Huawei SUN2000-45KTL-US-HV-D0 User Manual page 75

SUN2000-45KTL-US-HV-D0
User Manual
If you perform
The SUN2000 can start normally after the fault is automatically cleared. The default time for
auto correction is 1 minute. You can modify the time over the NMS software installed on the
PC that connects to the SUN2000.
Step 2 Turn the DC switch at the bottom of the SUN2000 to ON.
Step 3 (Optional) Measure the temperatures at the joints between DC terminals and connectors using
a point-test thermometer.
Under normal operation condition of SUN2000, the temperature at DC input connectors
should remain below 85°C (185°F) at all time.
Step 4 Connect the SUN2000 to the mobile phone that runs SUN2000 app (app for short) through a
Bluetooth module or USB data cable.
Mobile phone operating system: Android 4.0 or later, iOS 7.0 or later. When the iOS is

used, the app supports only Bluetooth connection.
The screen snapshots in this document correspond to app V200R001C20SPC010.

Figure 7-3 Bluetooth module connection
(A) SUN2000
Purchase the Bluetooth module bundled with the SUN2000. A Bluetooth module purchased from any
other source may not support communication between the SUN2000 and the app.


Issue 02 (2017-09-15)
Step 2 before Step
(B) Bluetooth module
The Android system supports the Bluetooth module USB-Adapter2000-B and BF4030.
The iOS system supports the Bluetooth module USB-Adapter2000-B.
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
1, the SUN2000 reports a fault about abnormal shutdown.
7 System Commissioning
(C) Mobile phone
69