Alert Log - Furuno DS-85 Operator's Manual

2.5.2

Alert log

The alert log stores the latest 100 alerts, the latest one at the top of the list. When the log becomes
full, the oldest entry is erased to make room for the latest. The log is updated whenever there is a
change in the status of the alerts. If the log contains no entries, [= NO ALERTS =] appears in the
log.
To view the alert log do the following:
1. Long-press the MENU/ESC key until the alert log appears.
2. Press  on the CursorPad to select the [LOG] tab to show the alert log.
Alert icon
Alert title
Alert message
3. To show the associated alert message for an alert title (in the guidance/alert info area), select
the alert title with the cursor.
4. Press the DISP key key to close the log.
LOG tab, number of
entries in log
Exports alert list and alert log
(for serviceman use).
18
2. MAINTENANCE
Time, date alert
generated.
Appears only when
time, date are fed
from an external
navigation device.
If there is no exter-
nal data, "- -" appears.