Indications; Active Indications List - Furuno DS-85 Operator's Manual

2. MAINTENANCE
2.6

Indications

Indication messages are generated for the errors not covered in IEC 61924-2. When an indication
is generated, the applicable indication message appears in the guidance/alert info area. In the
case of multiple indications, the indication with the highest priority is shown. The indication mes-
sage remains on the screen until the reason for the indication is removed or rectified.
2.6.1

Active indications list

The active indications list shows all the active indications, the latest one at the top of the list. If
there are no active indications, [=NO ACTIVE INDICATIONS=] appears on the list. The list is up-
dated whenever the status of an active indication changes.
You can see the active indications as follows:
1. Press the MENU/ESC key to open the main menu.
2. Select [5 INDICATION], then press the ENT key to show the indications list.
LIST tab, number of
active indications
Indication icon
Indication title
Indication mesage
3. To show the associated indication message (in the guidance/alert info area) for an indication
title, select the indication title with the cursor.
4. Press the DISP key to close the list.
Exports indications list and indications
log (for serviceman use).
19
Time, date alert
generated.
Appears only when
time, date are fed
from an external
navigation device.
If there is no exter-
nal data, "- -" appears.