Display Overview - Furuno DS-85 Operator's Manual

1. OPERATION
1.5

Display Overview

As shown in the figure below, the DS-85 display is made up of three major parts, status bar, details
display, and guidance/alert info.
* Example alert info display
Status bar
The status bar is shown on every screen, and gives you a quick, at-a-glance view of the DS-85's
current status. Icons and indications shown in the status bar are described in the table below.
Icon(s) Icon name
Display
mode
SPD/DIST
SPEED
DIST
Speed
STW
measurement
method
SOG
A
STW
A
SOG
Display unit
function
M
S
Ship speed
notification
Ship speed
notification
Operational
status
Service mode
icons
SIM
TEST
High temperature High temperature detected at the transducer. Does not appear
Details display
The details for the selected display mode are shown in this section of the screen. See section 1.6
for display mode information.
Details
display
System failure
Indicate the display mode.
[SPD/DIST]: Speed data and distance log.
[SPEED]: Speed mode
[DIST]: Distance log
Show speed measurement method.
[STW]: Speed Through the Water (Doppler calculation).
[SOG]: Speed Over the Ground.
[STW A]: Speed Through the Water, automatic selection.
[SOG A]: Speed Over the Ground, automatic selection.
Show the function of the display unit.
[M]: Main display
[S]: Sub display
The speed notification is active but the current speed does not
meet the conditions of the speed notice. Does not appear on
sub displays.
The speed notification is active and the current speed meets the
conditions of the speed notice. Does not appear on sub dis-
plays.
The icon rotates in a clockwise direction to indicate the equip-
ment is working normally.
These modes are accessible only by service technicians. See
the Installation Manual for details.
The icons do not appear on sub displays.
on sub displays.
3
Status
bar
Guidance/alert info*
HOLD : LIST
Description