Advertisement
8. Fix the attached magnet (Fig. 16) to the bottom profile of the frame (Fig. 17), at a maximum distance of
20cm from the edge of the frame.
9. Degrease the space along the frame (Fig. 18) then, starting from one of the corners, stick the first stripe of
LED strip (Fig. 19). The second band of the LED strip should be stuck starting from the same corner of the
screen but in the opposite direction. (One LED strip should cover the two sides of our screen, (Fig. 20) the
excess strip should be cut off.) Write down the number of LEDs on each side (information will be necessary in
the configuration of active backlight).
Fig. 16
Fig. 18
w w w . k a u b e r . e u
Fig. 20
-7-
Fig.17
Fig. 19
Advertisement
