General Safety Regulations; Danger Levels; Connection To The Electricity Grid - Fimap NANO Use And Maintenance Manual

Before using the appliance for the first time, read and comply with these safety
warnings. Keep these safety warnings for consultation in the future or to hand them
over to successive owners.
• Before commissioning, read the appliance's user manual.
• The warning plates on the appliance provide important instructions for its safe use.
• Always comply with both the directions on the instructions, as well as current safety standards.
• Keep the packing film out of the reach of children. Risk of asphyxiation!
DANGER: Indicates an imminent danger that could cause serious injury or death.
WARNING: Indicates a probable dangerous situation that could cause serious injury or
death.
CAUTION: Indicates a probable dangerous situation that could cause minor injuries.
ATTENTION: Indicates a probable dangerous situation that could damage objects.

CONNECTION TO THE ELECTRICITY GRID

DANGER:
• To reduce the risk of fire, electric shocks or injury, please carefully read and comply with all
the safety instructions and warnings. This vacuum cleaner has been designed to be safe
when it is used for cleaning in the manner specified. If damage to electrical or mechanical
components is found, the vacuum cleaner and/or the accessory must be repaired at the
relative authorised service centre or else at the manufacturer before use, in order to prevent
further damage to the appliance or physical injury to the user.
• Before connecting the appliance to the electricity socket, make sure the electrical information
on the plate corresponds to that of the mains supply. The appliance must only be powered
with alternating current and with the voltage shown on the rating plate.
• The power supply cable outlet must have an earth connection in compliance with the
regulatory standards.
• Before using, check for any damage on the connection cable and on the power plug. If the
power cable is damaged, it should be changed by customer services or by a technician with
similar qualifications.
• Connect the appliance only to an electrical connection installed by an electrical installer in
conformity with IEC 60364-1.
• Never touch the power plug with wet hands.
• Make sure that the cable to the mains or the extension cable have not been damaged by
having been walked on, crushed, pulled or the like. Protect the cable from heat and from
contact with oils or sharp edges.
• Regularly check that the cable connecting to the mains is not damaged, for example with
signs of ageing or cracks. If damage is found, the cable should be replaced before using the
appliance again.
• Protection against splashes of water and the mechanical strength need to be ensured also
after any replacement of the joints of the power cable or the extension cable.

GENERAL SAFETY REGULATIONS

DANGER LEVELS

4