Advertisement
Quick Links
Home
Products
About GRI
UL Listed Pool Alarms
Part Numbers
The GRI DPA-10 Series Pool Alarms operate on a 9 volt battery. U.L. requires that a Duracell
alkaline battery Model MN1604 be used. Both units will operate at any voltage of 5-15 volts
maximum. 12 volts is recommended to prevent sounder volume from dropping below minimum
sound pressure levels of 85dB at 10'.
Contact GRI
Where to Buy
Monitors Entry to Pool/Spa Areas
Listed per U.L. 2017
Microprocessor Controlled
Battery Operated
Low Battery Indicator
Exceeds Operational Requirements of Model Barrier Codes
Surface Mount
DPA-10 Instant On
DPA-10D 7 Second Delay
Testimonials
What's New!
Advertisement
Related Manuals for GRI DPA-10 Series
Summary of Contents for GRI DPA-10 Series
- Page 1 DPA-10 Instant On DPA-10D 7 Second Delay The GRI DPA-10 Series Pool Alarms operate on a 9 volt battery. U.L. requires that a Duracell alkaline battery Model MN1604 be used. Both units will operate at any voltage of 5-15 volts maximum.
- Page 2 15 second window of alarm deactivation and automatically reset upon expiration. The GRI DPA-10 Series operate on a 9 volt battery. U.L. requires that a Duracell alkaline battery Model MN1604 be used. TOLL-FREE 1-800-445-5218 TOLL-FREE 1-800-523-1227 GEORGE RISK INDUSTRIES, INC.
- Page 3 Battery Type 9 Volt Alkaline Duracell Model MN1604 The GRI POOL ALARM operates on a 9 volt battery. It is required that Typical Battery Life Approximately 3 to 6 months a Duracell alkaline battery Model MN1604 be used.
Need help?
Do you have a question about the DPA-10 Series and is the answer not in the manual?
Questions and answers