Fujitsu AMUG24LMAS Service Manual page 125

1-2. WEEKLY TIMER
1-2-1. WEEKLY TIMER
Use this timer function to set operating time for each day of the week.
The weekly timer allows up to two ON and OFF time to set up per day.
On
Off
The operating time can be set in 30 min increments only.
The OFF time can be carried over to next day.
The ON timer and the OFF timer functions cannot be set with using the weekly timer.
Both ON and OFF time must be set.
1-2-2. DAY OFF setting
DAY OFF setting is only available for days for which weekly settings already exist.
If the operating time carries over to the next day (during a next day setting), the effective
DAY OFF range will be set as shown below.
Normal
Operation mode
Stop mode
Preceding day
Next day setting
Stop mode
Preceding day
DAY OFF setting can only be set one time.
DAY OFF setting is cancelled automatically
after the set day has passed.
Set time Set time
Stop mode
Operation mode
Stop mode
On
Off
DAY OFF
Operation mode
Stop mode
Setting day
DAY OFF
Operation mode
Setting day
04-18
Set time Set time
Next day
Stop mode
Next day