Advertisement
FLEX4 Adapter Applications
The FLEX4 adapter enables extended Ethernet and PoE reach beyond traditional distances
using 1, 2 or 4 pair UTP infrastructure. When paired with the FLEX24 Switch, FLEX8 Switch or
FLEX-Base Extender, the adapter delivers 10/100Mbps, symmetrical full duplex. The FLEX
offering is designed specifically to enable easy deployment over Multi-Pair UTP for reaches
beyond that of standard Ethernet eliminating the costs and disruption associated with IDF
closet requirements.
10/100Mbps (full duplex, symmetrical) & PoE++ over multi-pair UTP with 2,000ft (610M) reach.
NV-FLX-024/NV-FLX-08
RUN
ALARM
FAULT
Reset
To Application
Standard PoE Switch
1
3
5
7
9
11
13
15
17
19
21
23
25
27
29
31
33
35
37
39
41
43
45
2
4
6
8
10
12
14
16
18
20
22
24
26
28
30
32
34
36
38
40
42
44
46
*Base Extender can be powered locally for use with non-PoE switches.
Technical Specifications
Model Number
FLEX4
Part Number
NV-FLX-04
9.8cm x 9.6cm x 2.5cm (LxWxH);
Dimensions
3.86" x 3.78" x 0.98" (LxWxH)
Weight
214 g (7.6 oz.)
Interface: Network
1 RJ45 port: UTP /STP cable (1-pair,
Infrastructure side
2-pair or 4-pair)
(FLEX)
4 RJ45 ports: adapter is IEEE 802.3
Interface: IEEE Side
af/at compliant and will negotiate
(IP Device)
power requirements with IP end
device
PoE from the FLEX switch, or
Power Supply
external power supply; maximum
30W (over 2-pairs) each port
Power
1.5W
Consumption
888.901.3633 | +44 (0) 208 977 6614
www.nvtphybridge.com
FLEX4
• Paired with FLEX24, FLEX8 or FLEX-Base
• 1 uplink port and 4 downlink ports
• Up to 30W PoE per downlink port
• Local power option
WE
1
2 3 4
5 6
7
8
1
3
5
7
9
11
13
15
17
19
21
23
2
4
6
8
10
12
14
16
18
20
22
24
NV-FLXLK-BSE
*
FLEX-Base
47
SFP+1
SFP 1
Long Reach PoE over UTP
48
SFP+2
SFP 2
(NV-FLX-04)
Multi-Pair UTP Cable
up to 2,000ft (610m)
Local Power Option
Multi-Pair UTP Cable
up to 2,000ft (610m)
Local Power Option
DC IN
Operating
Temperature
Mean Time Before
Failure (MTBF)
Humidity
NV-FLX-04
IP ENDPOINT
IP ENDPOINT
IP ENDPOINT
IP ENDPOINT
NV-FLX-04
IP ENDPOINT
IP ENDPOINT
IP ENDPOINT
IP ENDPOINT
Optional (sold separately)
48-56VDC via an external AC/DC
Power Adapter (IEC Class II isolated
only)
NOTE 1: Local power supply used
must have its output isolated from
Earth potential.
NOTE 2: If voltage of local power
supply is lower than the power
voltage provided from the PoE
switch, then power on the PoE
switch should be turned off.
-40C to +70C (-40F to +158F)
Tests conducted against international
safety standard at maximum ambient
temperatures of 60ºC at 64W and 55ºC
at 120W
20+ years
10% to 95% (non-condensing) at
35° C
Copyright 2019 NVT Phybridge
445-0019-A
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Related Manuals for NVT Phybridge FLEX4
Summary of Contents for NVT Phybridge FLEX4
- Page 1 • Local power option FLEX4 Adapter Applications The FLEX4 adapter enables extended Ethernet and PoE reach beyond traditional distances using 1, 2 or 4 pair UTP infrastructure. When paired with the FLEX24 Switch, FLEX8 Switch or FLEX-Base Extender, the adapter delivers 10/100Mbps, symmetrical full duplex. The FLEX offering is designed specifically to enable easy deployment over Multi-Pair UTP for reaches...
- Page 2 Cat6 2-Pairs Cat5e 4-Pairs Cat5e 2-Pairs *Note: PoE Power is shared on all 4 ports of FLEX4, to a max of 30 Watts output per port. Support and Warranty Technical Support The NVT Phybridge Technical Support Group is available to assist you with product installation, configuration, monitoring and troubleshooting procedures.
Need help?
Do you have a question about the FLEX4 and is the answer not in the manual?
Questions and answers