Table of Contents
Advertisement
M A I N T E N A N C E & S A F E T Y
•
Good maintenance is your responsibility. Poor
maintenance is an invitation to trouble.
•
Make sure maintenance area has plenty of
ventilation. Beware, exhaust fumes may cause
asphyxiation.
•
Prior to commencing work, IDENTIFY ALL
HAZARDS! Use control measures to eliminate
these dangers.
•
Use blocks to support frame of machine on level
area free of obstruction.
•
Always use a safety support and chock the wheels.
•
Never use an implement jack to support the
machine. Only when doing maintenance.
•
Never work under raised machine unless all
components are securely positioned and locked.
•
Engage all safety transport locks, chock wheels and
front drawbar for temporary service if machine is in
free standing mode.
•
A fire extinguisher and first aid kits should be kept
readily accessible while performing maintenance
on this equipment.
•
Follow the torque chart in this manual when
tightening bolts and nuts.
•
Refer to bolt torque chart for head identification
marking.
•
Always replace bolts with specified grades.
•
Where replacement parts are necessary for periodic
maintenance and servicing, genuine factory
replacement parts must be used to restore your
equipment to original specifications,
•
Always use approved lifting equipment.
•
If equipment has been altered in any way from
original design, the manufacturer does not accept
any liability for warranty or personal injury.
•
Replace all shields and guards after servicing before
moving.
•
After servicing, be sure all tools, parts and service
equipment are removed.
•
The machine is identified by the serial number on
the metal plate on the machine. When requesting
spare parts or maintenance service, please indicate
the model and number of your equipment to ensure
prompt and efficient attention.
28
2740T TRASHCUTTER
new 2740 trashcutter op & safety manual.indd 28
new 2740 trashcutter op & safety manual.indd 28
•
K-Line Agriculture spare parts and
accessories have been specifically
designed and developed for the
machines produced. We would call
your attention to the fact that
non-genuine parts and accessories are
not recommended by K-Line. Use of
non-genuine parts and accessories
releases K-Line from all liability and
makes the warranty void.
The installation and/or use of
non-genuine parts may, because
of
technical
characteristics
construction, modify or influence
the performance of the machine
negatively.
OPERATOR & SAFETY MANUAL
of
6/12/2019 7:07:05 PM
6/12/2019 7:07:05 PM
Advertisement
Table of Contents
