Transporting/Roading - K-Line TRASHCUTTER 2740T Operators Safety Manual

S A F E T Y

TRANSPORTING/ROADING

1. Ensure towing unit weight is the same as or greater
than the towed unit.
2. Ensure tires are correctly inflated.
3. Check wheel nut tension.
re-tensioning times 4 sequence.
4. Ensure safety chains are attached to towing unit.
5. Tractor drawbar must be in fixed position, not
swinging.
6. Ensure tractor brakes are latched together & drawbar
locked. i.e not swinging.
7. Plan your route to avoid heavy traffic.
8. Observe bridge load ratings & speed limits.
TIP OVER HAZARD this is an unbraked implement. Use
extreme caution when turning, and on steep terrain.
Maximum towing speed is 20mph (32km/hr). DO NOT
EXCEED AT ANY TIME.
NEVER transport machine on public roads without
complying with Federal and State laws and local
regulations governing the safe movement of farm
machinery.
Figure 22
POWER LINES CAN ARC & ELECTROCUTE WITHOUT COMING IN DIRECT CONTACT
Figure 23
Consult electricity authorities and all relevant energy companies to determine safe working distances
from overhead power lines etc. BEFORE operation of this machine:
• Ensure all operators are familiar with this manual and all safety devices and features of the machine.
• Take every reasonable precaution as is commonly expected in this industry and in the operation of
the machine.
• Maintain the machine at all times in a condition that is safe to operate, and ensure it complies with any
relevant safety acts of parliament, government authorities and regulations.
2740T TRASHCUTTER
new 2740 trashcutter op & safety manual.indd 23 new 2740 trashcutter op & safety manual.indd 23
Pg 17
*NB -
Pg 17 for wheel nut
.
Figure 20
Figure 21
Figure 22
OPERATOR & SAFETY MANUAL
23
6/12/2019 7:07:01 PM 6/12/2019 7:07:01 PM