To Unhitch In Working Position; 'A' Frame Level Adjustment - K-Line TRASHCUTTER 2740T Operators Safety Manual

S A F E T Y
TO UN-HITCH IN WORKING POSITION
1. Stop tractor.
2. Operate tilt to lessen down pressure on working discs, but
not to raise.
3. Use implement jack to support drawbar.
4. Release pin & disconnect hydraulic hoses from tractor &
store.

'A' FRAME LEVEL ADJUSTMENT

Adjustment hole settings for 'A' frame level provided on tow
hitch.
DANGER ; BEWARE OF UPTHRUST & DOWN
THRUST ON DRAWBAR DURING OPERATION.
- Tractor weight must be equal to machine weight.
- Drawbar pin must be securely fastened.
- Safety chains attached.
NEVER disconnect from tractor unless stubble cutter is:
1. In transport position (wings folded)
OR
2. In working position with wings fully lowered to ground
FAILURE TO COMPLY WILL RESULT IN SERIOUS
INJURY OR DEATH
Figure 19
22
2740T TRASHCUTTER
new 2740 trashcutter op & safety manual.indd 22 new 2740 trashcutter op & safety manual.indd 22
UPTHRUST FORCE ON DRAWBAR
‫ ـ‬Tractor weight must equal machine weight
‫ ـ‬Drawbar pin must be firmly secured
‫ـ‬
Safety chains attached correctly
Failure to comply will result in serious injury or death
Figure 18
Hole settings
OPERATOR & SAFETY MANUAL
580mm
6/12/2019 7:07:00 PM 6/12/2019 7:07:00 PM