Disc Angle Adjustment Centre Section; Wing Wheel Angle Adjustment - K-Line TRASHCUTTER 2740T Operators Safety Manual

F I E L D O P E R A T I O N
DISC ANGLE ADJUSTMENT CENTRE
SECTION
*NB
Adjust angle to correspond with wing angle
adjustment
(see figure 31)

WING WHEEL ANGLE ADJUSTMENT

Adjustment for correct alignment altering wing angle
settings.
2740T TRASHCUTTER
new 2740 trashcutter op & safety manual.indd 27 new 2740 trashcutter op & safety manual.indd 27
Release and tighten after adjustment
For angle adjustment hole settings
Figure 31
Centre section adjustment system
Wing wheel adjustment holes
Figure 32
OPERATOR & SAFETY MANUAL
27
6/12/2019 7:07:05 PM 6/12/2019 7:07:05 PM