Receiver Settings - ORQA FPV.ONE User Manual

RECEIVER SETTINGS

In this menu, you can select the receiver module that you have installed into
the main receiver module bay.
In order to control the different receiver modules directly from the goggles,
it is important to select the receiver module that you are using.
Also, by selecting the correct module the goggle's OSD and module's OSD
will work together without conflicting with each other.
For example, if RapidFire is selected, you will be able to change the channel
by short pressing the CHANNEL UP or CHANNEL DOWN buttons on
the goggles.
A long press on the CHANNEL UP or CHANNEL DOWN buttons
changes the band on the receiver module. This feature is only available only
in rapidFIRE mode.
Above function is only available outside of main menu.
9
Orqa FPV.ONE User Manual, Rev.1.6
©2020. Orqa Ltd.