About - ORQA FPV.ONE User Manual

ABOUT

In the "About" screen you can see some important information about your
goggles.
To set up the ​ D ate/Time​ go into Date and Time sub-menu and change the
settings.
Once set, press the main joystick to save and exit this setting.
Under the "Info" sub-menu you can find the firmware and hardware version,
your goggles ID and uptime of your goggles.
Firmware version shows the current firmware version installed on the
goggles. Every time the firmware updates the info will be shown here.
It will show the current version.
Hardware version Hardware version shows the hardware (electronics)
version of the goggles. This info is factory set and cannot be changed by the
user.
Goggle ID is the unique ID of your goggles. You can use it in case you need
to contact the support or register your goggles online. Also, you can find it
on the sticker with the QR code inside of the secondary module bay and on
the packing box.
Up time shows the total up time of the goggles. This info is automatically
stored in the goggles and cannot be reset or changed by the user.
To revert all the settings to the factory settings, depress the ​ F actory reset
item on the menu.
17
Orqa FPV.ONE User Manual, Rev.1.6
©2020. Orqa Ltd.