ORQA FPV.ONE User Manual page 15

The ​ P OWER BUTTON MODES setting is used to set the desired way you turn
on/off your goggles.
There are 3 power-on modes:
▪ Mode 1: SINGLE PRESS
▪ Mode 2: ONE SHORT - ONE LONG PRESS
▪ Mode ALWAYS ON
In the ALWAYS ON mode goggles are powered ON/OFF by plugging or
unplugging the power source (battery) to the goggles.
The sound feedback can be switched on or off with the ​ B UTTON SOUND​ .
THE JOYSTICK SETTINGS
You can choose from below joystick settings.
you can invert joystick (swap up and down on joystick)
●
you can switch the buttons sound on/off
●
joystick-choose right or left joystick for main menu control
●
​ Q UICK IMAGE SETTINGS
ON/OFF- can be used to set image quickly with left and right joystick without
going into image settings (can be used only outside the main menu).
Left joystick
Up and down- brightness
●
Left and right-contrast
●
Right joystick
Up and down- Luminescence
●
Right and left-Color
●
15
Orqa FPV.ONE User Manual, Rev.1.6
©2020. Orqa Ltd.