Orqa Original Battery - ORQA FPV.ONE User Manual

ORQA ORIGINAL BATTERY

The goggles should be powered by a power source with a voltage between
6.0 and 10.0 VDC. The best way to power your goggles is to use the supplied
Orqa Original Battery.
The Orqa Original Battery holds two 18500 Li-ion cells inside connected in 2S
configuration. The battery case features the battery fuel gauge. To check the
actual battery charge level, press and hold the button on top of the battery.
The battery fuel gauge displays the level with four LED-backlit bars. Each bar
represents roughly 25% of the full charge. The battery capacity is 2000 mAH.
The battery fuel gauge goes off after 2 seconds even if you are still holding
the button pressed. This will prevent the unintended battery discharge if the
button gets unintentionally pressed in transport.
Once the battery is empty, it needs to be recharged. To recharge the battery,
connect the barrel plug to the Li-ion battery charger.
The battery case features the standard JST 3 pole balance connector. The
best practice is to balance charge the battery in order to keep the cell's
voltage on the same level. This will ensure the optimal performance and
long life of the battery cells.
27
Orqa FPV.ONE User Manual, Rev.1.6
©2020. Orqa Ltd.