Stand By - ORQA FPV.ONE User Manual

STAND BY

The goggles feature the "Stand-By" option which helps to save the battery.
When the Stand-By mode is activated the goggles will go into the stand-by
when they are taken off the head.
In order to have the Stand-by mode function properly make sure that the
stand-by sensor is not obstructed by the face pad foam.
To activate the Stand-by mode set it to On. The goggles will enter the
stand-by after the set delay time has passed.
The default delay time setting is 20 seconds, and it can be adjusted in steps
of 10 seconds to a maximum of 240 seconds.
Once the goggles are put back on, they will automatically turn back on.
Please note that the Stand-by function will turn off only the micro displays
and the receiver installed in the main receiver bay. The rest of the system will
stay powered on.
13
Orqa FPV.ONE User Manual, Rev.1.6
©2020. Orqa Ltd.