Image Settings - ORQA FPV.ONE User Manual

IMAGE SETTINGS

IMAGE SETTINGS are used to adjust Contrast, Brightness, Color, Aspect Ratio
and Supersize.
You can access the image settings via the user menu to fine-tune the image.
When adjusting Contrast, Brightness, and Color, you will see a little image in
the right corner of OSD where you can track your settings while changing
them. There you can change the setting between 0 and 100 by moving the
main joystick ( or left and right.
With the ASPECT RATIO setting you can choose between the 16:9 and 4:3
image ratio. Adjust this setting to best fit your image source.
SUPER SIZE, due to large FOV some of the users can experience pincushion
distortion on the edges of the image. To counter that, the system crops
some pixels in the corners of the screen. The SUPER SIZE setting is for users,
who want to use 100% of the screen.
The RESET TO DEFAULT setting is used to reset all the parameters of the
image to their factory-set values.
PIP Image settings are not functional when HDMI is input source.
12
Orqa FPV.ONE User Manual, Rev.1.6
©2020. Orqa Ltd.