Battery - ORQA FPV.ONE User Manual

BATTERY

When flying, one of the most important things is to know your battery
status. The goggles can show the battery charge level on-screen and notify
you when the battery voltage is low.
There are a couple of options to set up how the battery information is
displayed.
In the Battery >Display menu you can choose whether the battery charge
level is showed in "Volts" or in Percentage. In normal use, to display the
battery status simply press the "Battery check" button.
When battery voltage is below 6.1V, the goggles will safely shutdown.
Additionally, you can choose where on the screen the battery info will be
displayed. To adjust the position, enter the "OSD Position" menu and then
position the battery info on the screen by moving the left-hand joystick
up-down and left-right. Once you are satisfied with the position, confirm the
setting by depressing the left-hand joystick .
The goggles can alarm you when the battery is low. You can choose the
value between 6.45-7V for the alarm to start. The value can be changed at
intervals of 0.05 V in between 6.45 and 7V.
If the battery voltage drops to the chosen low battery alarm value, goggles
will notify you with three short beeps and the battery voltage (or
percentage) will be displayed in red color on the screen. The audible alarm
will be repeated every 60 seconds.
To turn the Low battery alarm on, change the setting to ON.
16
Orqa FPV.ONE User Manual, Rev.1.6
©2020. Orqa Ltd.