Related Manuals for Broyhill Biltmore SC-K-454PGSND
Summary of Contents for Broyhill Biltmore SC-K-454PGSND
- Page 1 BILTMORE PATIO FUTON SWING ASSEMBLY INSTRUCTION ITEM#: SC-K-454PGSND SKU#: 810453870 Need help? We are here for you! Please contact 1-800-457-4652 or contact us at www.numarkcustomerservice.com for assistance...
-
Page 2: Cleaning And Maintenance
WARNINGS KEEP ALL FLAME AND HEAT SOURCES AWAY FROM CANOPY FABRIC The canopy is made with flame-resistant fabric which meets CPAI-84 specifications. It is not fireproof. The canopy fabric will burn if left in continuous contact with flame source. The application of any foreign substance to the canopy fabric may render the flame-resistant properties ineffective. -
Page 3: Pre-Assembly
Pre-Assembly Planning Assembly To prevent damage, place all parts on a soft, non-abrasive surface during assembly. • Identify all parts • Read through all instructions before beginning assembly Hardware Included Note: Hardware not shown to Actual size. Sj (2) Sa (8 + 1 spare ) M6 x 12L Bolt Sk (2) Sb (12 + 1 spare ) -
Page 4: Package Contents
Post Base Base Plate Assembly Note: The Broyhill Logo located on one of the Base Plates should be positioned on the front Attaching the Leg Post to the Post Plate and Base Plate left post as you face the swing. - Page 5 Assembly Attaching the Side Panel to the Leg Post Se x 16 Ss x 16 Si x 16 M8 x 20L Bolt Large Locker Washer Large Metal Washer Do not tighten completely. Repeat procedure for the other side and the other pair of leg posts. Assemble Top Crossbars Sr x 8 Sb x 8...
- Page 6 Assembly Insert Inside Canopy Crossbar into Top Crossbar Insert both ends of the inside canopy crossbar into top crossbar at the same time. Repeat procedure for the other two inside canopy crossbars. Insert Outside Canopy Crossbar into Top Crossbar Sb x 4 Sr x 4 M6 x 18L Bolt Small Locker Washer...
- Page 7 Assembly Attach Seat and Back to Left and Right Arm Sj x 2 Sg x 2 M8 x 77L Bolt Sk x 2 Si x 2 Plastic Washer Large Metal Washer Note: the side of the seat with “front” label should be in accordance with the side with label of the arm. Repeat procedure for the other side.
- Page 8 Assembly Insert Canopy Side Bar into Canopy and Attach Cushion (Swing is ready for use) Note: The Broyhill Logo located on one of the Base Plates should be positioned on the front left post as you face the swing. Converting Swing to Canopy Bed Remove the cushions.