Table of Contents
Advertisement
Electronics
5-6 Microinverter Operation Issues
A
Web Monitoring system
A. If the web monitoring system notifies you that particular AC modules are not communicating
with the EnerBox2, then write down the location of the AC module and MAC address.
B. Find out the physical location of the target AC modules. Please make sure that you are equipped
with proper Personal Protective Equipment that can protect you.
C. During the daytime, check whether the LED blinks red or shows no lights. And keep the LED
status in mind or write it down in your notes.
Grid connectivity
LED Status
•
Plan the installation work in moderate weather. There is a risk of electric shock when it is raining or snowing.
•
To prevent the risk of accidents, use proper PPE (Personal Protective Equipment) including helmets, eye
protection and gloves at all times.
•
If installation location is high above ground, make sure to use the Fall Protection System during the
installation.
Rev. 1.0
AC Module System Installation Manual
or
C : Check LED status
Grid connection (5 min. after grid
connection)
LED off
Red Blinking LED
Red Blinking LED
LED off
Copyright © 2020 LG Electronics.
All Rights Reserved.
B
Installed AC module system
Grid disconnection
LED off
abnormal A
LED off
abnormal B
Red Blinking LED
abnormal C
Red Blinking LED
Case
normal
88
Advertisement
Table of Contents
