Table of Contents
Advertisement
Electronics
4-1 EnerBox2 Components
After completing the installation of AC modules on the rooftop or other site, the next step is to install the communication
gateway(EnerBox2) which enables home owners and installers to monitor power production of individual AC module or
the entire array on a daily, monthly or an annual basis. The communication gateway is simple to setup by connecting the AC
modules and internet router. Power Line Communication (PLC) method facilitates communication between the gateway
and AC modules. Then the gateway collecting energy and performance data from the AC modules in real time transmits
the accumulated log data to a web server through an Internet router.
Wi-Fi Antenna
1. EnerBox2 Front-side
4. EnerBox2 Power-cable
4-2 Simple Diagram for Communication System Configuration
EnerBox2
Rev. 1.0
AC Module System Installation Manual
Power
Production
LED
5. LAN cable
LG EnerVu for Professionals or for
Owners on a desktop or laptop
Copyright © 2020 LG Electronics.
All Rights Reserved.
2. EnerBox2 left-side
3. EnerBox2 bottom-side
6. Wall mount bracket
Internet Router
LG EnerVu for Professionals or
for Owners on a smart phone
7. Wall mount
bracket screws
49
Advertisement
Table of Contents
