Inspecting Components Of Enerbox2 - LG A1C-V5 Series Installation Manual

Electronics

3-4 Inspecting Components of EnerBox2

After completing the installation of AC module on the rooftop or other site, next step is to install
the communication gateway (EnerBox2) which enables homeowners and installers to monitor
power production of individual AC module or the entire array on a daily, monthly or annual basis. The
communication system is simple to connect the gateway with each microinverter and an internet router.
Power Line Communication (PLC) method facilitates communication between the gateway and each
microinverter, then the gateway collecting energy and performance data from the AC modules in real
time transmits the accumulated log data to a web server through an internet router.
Wi-Fi Antenna
EnerBox2
EnerBox2 left-side
3
EnerBox2 bottom-side
4
EnerBox2 power cable
5
Rev. 1.0
AC Module System Installation Manual
2
1
Lan Cable
6 7
Copyright © 2020 LG Electronics.
All Rights Reserved.
EnerBox2 (Gateway)
(Contact distributor to order)
1. EnerBox2
is to collect energy harvest volume data from
installed AC modules.
2. Wi-Fi antenna
is attached on the body of EnerBox2 for wireless
connection of an EnerBox2 to a homeowner's
existing router. A router is not provided by LG
Electronics.
3. EnerBox2 left-side
provides many functions including reset, buttons,
LEDs, etc.
4. EnerBox2 bottom-side
provides slots for power cable, LAN cable and
USBs.
5. EnerBox2 power cable
is used to provide power to EnerBox2 for
operation.
6. Lan Cable
to connect the router in case wireless service is
not provided by a router.
7. Wall mount bracket
can be used for the EnerBox2 to be installed on
a wall.
8. Wall mount bracket screws
hold the wall mount bracket on a wall.
Wall mount bracket
8 Wall mount bracket screws
14