Mitsubishi Electric FR-F800 Series Sample Screen Manual page 73

7.1.2.2 Controller Settings of Screen Design Software
GOT NET No.
GOT Station
GOT Communication Port No..
Retry (Times)
Startup Time (Sec)
Timeout Time (Sec)
Delay Time (ms)
GOT Ethernet Setting
Update GOT Ethernet Standard Port
Setting
GOT IP Address
Subnet Mask
Default Gateway
Peripheral S/W Communication Port No.
Transparent Port No..
7.1.3 Ethernet Controller Settings of Screen Design Software
Host Net No.
1
1 *
*1: Change the models according to the CPU in use.
QCPU: QnUD(P)V/QnUDE(H)
LCPU : LCPU
7.1.4 Routing Information Settings
Routing information settings is required in order to connect to a different network. Set as below.
Transfer Net No.
CH1
7.1.5 PLC Side Settings (GX Works3)
(1) Go to [Parameter]-[Module Information] and add RJ71EN71.
[RJ71EN71(E-E)] - [Port 1 Module Parameter (Ethernet)] - [Basic Settings] - [Own Node Settings]
IP Address
Communications by
Network No./Station No.
Setting Method for Network No. and
Station Number
Network No.
Station Number
(2) Go to [Parameter] - [Module Information] - [RJ71EN71(E-E)] - [Port 1 Module Parameter(Ethernet)] -
[Application Settings] - [Network Station No. <-> IP Information] and set the destination network number,
station number, and IP address.*1
Network No.
2
2
*1: For QCPU and LCPU, go to [Parameter] - [Network Parameter (Ethernet/CC IE Field)] in GX Works2 and
add Ethernet to the module 1, and apply the settings above under [Station No. <-> IP Information].
*2: Apply settings to all the connected inverters.
For detail, please refer to the user's manual of the devices in use.
Item
Item
Station Unit Type
1 RCPU *1
2
Item
Station IP Address
40 192.168.3.40
1
192.168.3.50
Set Value
1
18
5001
3
3
3
0
Set Value
Checked
192.168.3.18
255.255.255.0
0.0.0.0
5015
5014
IP Address
192.168.3.39
Relay Net No.
1
Set Value
192.168.3.40
Enable
Not Use IP Address
2
40
Set the Ethernet module's station number and
IP address.
Set the inverter's station number and IP
address*2.
73/83
Remarks
Remarks
Port No. Communication
5006
UDP
Relay Station No.
1
Remarks
Ethernet unit IP address
Remarks
BCN-P5999-1067