Berthing, Anchoring, Towing - BENETEAU ANTARES 36 Owner's Manual

15.3

BERTHING, ANCHORING, TOWING

15.3.1 Anchor points
Responsibility
It is the responsibility of the owner/user of the boat to ensure that the berthing lines, towing cables, chains and mooring
lines and the anchors are adequate for the intended use of the boat, i.e. that the lines or chains do not exceed 80 % of the
breaking strength of the corresponding anchor point.
It the boat is towed, it is essential that the PODs are in line with the boat (see Chapter "Instructions in the event of steering
gear failure").
Reference
(Diagram on next page)
Anchor Point Breaking Strength
Mooring Line/Chain Breaking Strength
Pass warps through the fairleads provided for this purpose.
Deck fittings
MOORING LINES MOORING
A A / B
24,2 kN 34,7 kN
19,3 kN 27,8 kN
TOWING
A / B
34,7 kN
27,8 kN
160
The anchoring points or those showing visible
signs of deterioration must be replaced.
197855 RCD-2
Index B