Chapter6 Outer Case Design Guide; Securing The Printer Main Body; How To Mount The Printer Main Body; Figure 6-1 Dimensions For Positioning And Securing The Printer Main Body - Seiko SII LTP01-245-11 Technical Reference

6.1 SECURING THE PRINTER MAIN BODY

6.1.1 How to Mount the Printer Main Body

Figure 6-1 shows dimensions for positioning and securing the printer main body.
 Holes #1 and #2 must be used for positioning the printer main body. Design bosses on the outer
case to position the printer main body for the positioning holes #1 and #2. The height of the bosses
on the outer case must be 0.7±0.1mm.
 Secure the printer main body using screws at the holes A and B.
 Design a hook for the concave C.

Figure 6-1 Dimensions for Positioning and Securing the Printer Main Body

OUTER CASE DESIGN GUIDE
62.2
57.95
50.5
C Fixing hook
#1
A
59.15
CHAPTER 6
C
2.4
#2
B
General tolerance for dimensions
6-1
4.7
+0.15
2.3
0
C Fixing hook
Positioning boss
0.7
Unit : mm
: ±0.1