Outer Case Design Guide; Securing The Printer Main Body; How To Mount The Printer Main Body - Seiko LTPD245D Technical Reference

6.1 SECURING THE PRINTER MAIN BODY

6.1.1 How to Mount the Printer Main Body

Figure 6-1and Figure 6-2 show dimensions for positioning and securing the printer main body.
• Holes #1 and #2 must be used for positioning the printer main body. Design bosses on the outer
case to position the printer main body for the positioning holes #1 and #2. The height of the bosses
on the outer case must be 1.5mm (Max.)
• Secure by screw at the U shaped screwing position C.
• Design the fixing hook to the part of a and b.
CHAPTER 6

OUTER CASE DESIGN GUIDE

6-1