Page 1
1. The KOAMTAC device itself must be configured for use, and 2. the accompanying mobile device (e.g. smartphone) it will be paired with must be equipped with the correct APN to be able to connect it and the KOAMTAC to a CBRS network.
Instruction Manual – APN Configuration KOAMTAC KDC470Ci BASIC CONFIGURATION GUIDE KOAMTAC KDC470Ci with Android and iOS devices Geoverse | 13920 SE Eastgate Way, Suite 115 | Bellevue, WA 98005 | www.geoverse.io | 425.217.0600...
Page 3
Instruction Manual – APN Configuration KOAMTAC KDC470Ci STEP 1: Power off Power off the phone and insert it in the case. This case contains the barcode scanner unit shown below: Turning the KDC470 On or Off To turn on, press any SCAN button and DOWN button together for 3 seconds at the same time until you hear a short beep sound.
Page 4
The KDC can send data or receive commands to or from the host device. So, any application is required to use KDC. One example is Koamtac’s KTSync, which is developed using Koamtac SDK (Software Development Kit). When connected to KTSync application, the data can be wedged to the keyboard.
Page 5
Instruction Manual – APN Configuration KOAMTAC KDC470Ci Navigate to the Bluetooth settings on the device and turn Bluetooth on. Underneath the list of available devices, tap on the KDC470. The serial number will appear in brackets, which you can cross-check with the serial number on the back of the KDC. ...
Page 6
Instruction Manual – APN Configuration KOAMTAC KDC470Ci STEP 4: Usage You can use KTSync to utilize your KDC alone or with a native application. This is only available using USB OTG (Android), Serial (iOS), or Bluetooth connection with SPP or MFi. ...
Page 7
Instruction Manual – APN Configuration KOAMTAC KDC470Ci Change “KTSync Keyboard” to the default keyboard. (Fig. 4) To switch back to the previous keyboard, simply change the default keyboard again. Or, when a text field is selected, swipe down from the top of the screen to bring up the notification panel.
Page 8
Instruction Manual – APN Configuration KOAMTAC KDC470Ci < Fig. 6 > < Fig. 7 > Open the application you want to scan into and tap on the screen, so the on- screen keyboard appears. Press and hold the globe icon located to the left of the spacebar.
Page 9
KOAMTAC KDC470Ci < Fig. 8 > A Software Development Kit (SDK) for Android and iOS is available to all KOAMTAC customers to ensure the smooth development of applications that work seamlessly with a KDC scanner. It’s easy to request the SDK from the KOAMTAC website: ...
Page 10
KOAMTAC KDC470Ci < Fig. 9 > The KOAMTAC setup manual was based on KOAMTAC’s User Manual. For additional barcodes, questions, and features, you can find it here. Geoverse | 13920 SE Eastgate Way, Suite 115 | Bellevue, WA 98005 | www.geoverse.io...