Restoring Factory Defaults - Dukane iQ Series User Manual

i220 Servo Ultrasonic Welder User's Manual
Restoring Factory
Defaults
The servo press systems has a means of restoring all
programmable parameters to factory defaults, which
is intended to assist in troubleshooting or correcting
unintended parameter changes. Once the restore process
is completed and a weld cycle is run with the default
parameters, the press should perform a very short-stroke
weld motion.
To restore factory defaults in iQ Explorer or iQ Explorer
II, perform these steps:
1. Select the System tab.
2. Press OK on the WARNING message that appears.
3. Press the Restore Factory Defaults button.
4. Press YES to confirm the action.
To restore factory defaults on a generator with a color
front panel display, perform these steps:
1. Navigate to the Main Menu.
2. Select Utilities/Hardware.
3. Select Hardware Setup.
4. Scroll to Restore Factory Defaults.
5. Select Restore Defaults.
6. Select YES to confirm the action.
Page 88
Dukane Manual Part No. 403-601-00