Installing A Single Ups; Installing The Ups - Huawei UPS2000-G Series Quick Manual

Installing a Single UPS

1. Carefully read the
familiar with product information and safety precautions.
2. Use insulated tools when installing the UPS.
3. Only engineers certified by the manufacturer or its agents are allowed to perform UPS
commissioning and maintenance. Otherwise, personal injury or equipment damage may
occur, and the resulting UPS faults are beyond the warranty scope of Huawei.
1

Installing the UPS

Scenario 1
Rack-mounting
1. Determine installation dimensions.
UPS (2 U)
(Optional) Battery
2. If adjustable guide rails are required, install them. If no adjustable guide rail is required, install
only four floating nuts.
Do not push the guide
rail out of the rack
when putting the UPS
into the rack, as the
front end of the guide
rail is not screwed.
3. Remove the LCD protective cover, install mounting ears, and install devices from bottom to top,
as shown in the following figure.
LCD
E SC
(Optional) Battery pack, 3 U
UPS2000-G-(6 kVA-20 kVA) User Manual
E SC
pack, 3 U
Front
UPS (2 U)
prior to installation to get
M6x16 (4 PCS)
Rear
M4x8 (8 PCS)
1.2 N· m
2
3 N· m
M6x16 (4 PCS)
3 N· m
UG06009994
UG06009999