Methods For Cleaning Stainless Steel - Beverage-Air BM Series User Manual

User Manual for BM Refrigerators

METHODS FOR CLEANING STAINLESS STEEL

Cleaning Needed
Smears and fingerprints
Stubborn Spots and
Stains, Baked-On
Splatter, and Other
Light Discolorations
Heat tint or
discoloration
Burnt-On Foods and
Grease Fatty Acids,
Milkstone (where
swabbing or rubbing
is not practical)
Tenacious Deposits,
Rusty Discolorations,
Industrial
Atmospheric Stains
Hard Water Spots
and Scale
Rev. 08/20
Cleaning Agent
Areal 20, Lac-O-Nu, Lumin Wash
O'Cedar Cream Polish, Stainless
Shine.
Allchem Concentrated Cleaner.
Samae, Twinkle or Cameo Copper
Cleaner
Grade FFF Italian pumice, whiting,
or talc.
Liquid NuSteel
Paste NuSteel or DuBois Temp.
Copper's Stainless Steel Cleaner
Revere Stainless Cleaner
Household cleansers, such as
Old Dutch, Lighthouse, Sunbrite,
Wyandotte, Bab-O, Gold Dust,
Sapolio, Bon Ami, Ajax, or Comet
Grade F Italian Pumice, Steel
Bright, Lumin Cleaner, Zud,
Restore, Sta-Clean, or Highlite.
Penny-Brite or Copper-Brite.
Penny-Brite or Copper-Brite.
Past NuSteel, DuBois Temp,
or Tarnite. Revere Stainless Steel
Cleaner. Allen Polish, Steel Bright,
Tenacious Deposits,
Rusty Discolorations,
Industrial
Atmospheric Stains Wyandotte,
Bab-O or Zud.
Easy-Off, De-Grease-It, 4 to 6%
hot solution of such agents as
trisodium phosphate or sodium
tripolyphosphate or 5 to 15% caustic
soda solution
Oakite No. 33, Dilac Texo 12, Texo NY,
Flash-Klenz, Caddy Cleaner,
Turco Scale 4368 or Permag 57.
Vinegar.
5% oxalic acid, 5% sulfamic acid, 5 to
10% phosphoric acid, or Dilac, Oakite
No. 33, Texo 12, Texo N.Y.
Method of Application
Rub with cloth as directed
on the package.
Apply with damp sponge or
cloth.
Rub with damp cloth.
Rub with damp cloth.
Rub with dry cloth.
Use small amount of cleaner.
Rub with dry cloth using a
small amount of cleaner.
Apply with damp sponge or
cloth.
Rub with a damp cloth. May
contain chlorine bleaches.
Rinse
thoroughly after use.
Rub with a damp cloth.
Rub with a dry cloth using a
small amount of cleaner.
Rub with a dry cloth.
Rub with a dry cloth or stain-
less steel wool.
Apply with damp sponge or
cloth.
Rub with a damp cloth.
Apply generous coating. Allow
to stand for 10-15 minutes.
Rinse.
Repeated application may be
necessary.
Swab and soak with clean
cloth.
Let stand 15 minutes or more
according to directions on
package, then rinse and dry.
Swab or wipe with cloth. Rinse
with water and dry.
Swab or soak with cloth. Let
stand 10-15 minutes. Always
follow with neutralizer rinse,
and dry.
Beverage-Air
Beverage-Air
Affect on Finish
Satisfactory for use on all
finishes.
Provides barrier film to
minimize prints.
Use in direction of polish lines
on No. 4 (polished) finish. May
scratch No.
2 (mill) and Nos. 7 and 8
(polished) finishes.
Excellent removal, satisfactory
for use on all finishes.
Satisfactory for use on all
finishes
Satisfactory for all finishes.
Satisfactory for all finishes.
Effective on tenacious deposits
or where scale
has built up.
15