Malfunctions, Cause, Remedy - Silvercrest MONSIEUR CUISINE CONNECT Operating Instructions Manual

__317552_MC-Connect_GB.book Seite 33 Donnerstag, 21. März 2019 10:53 10

18. Malfunctions, Cause, Remedy

Malfunction
Device does not start.
Liquid underneath the device
Liquid escapes at the lid 23
of the blender jug 5.
No temperature can be set. A speed setting 4 - 10 was selected.
Parts of the device are dis-
coloured.
A speed setting exceeding 3
cannot be selected.
Error messages or notes in
the screen.
Cause
Blender jug 5 is not positioned correctly.
Lid 23 or deep steamer attachment 3
have not been placed correctly onto the
blender jug 5.
No power supply.
The blade assembly 18 has not been in-
serted correctly so that the blender jug 5 is
leaking.
Seal 17 for blade assembly is defective.
Liquid escaped from the blender jug 5
flowing onto the work surface through the
overflow hole 12 of the base unit 13 (see
"Overflow hole" on page 18).
Seal 22 has not been inserted correctly.
Seal 22 is defective.
Certain foods or spices (e.g. curry) may
discolour the plastic. This is not a device
error.
A temperature has been set.
Warning against incorrect operation.
Remedy
Insert blender jug 5 correctly (see "Insert
blender jug" on page 12).
Place lid 23 or deep steamer attach-
ment 3 correctly.
Check mains plug 15, on/off switch 7
and possibly the fuse.
Insert blade assembly 18 correctly (see
"Using and removing the blade assembly"
on page 12).
Insert(see "Cleaning, checking and re-
placing seals" on page 31) new seal 17.
When mixing liquids at speed 10 or with
button Turbo 36, the blender jug 5 must
not contain more than 2.5 litre, since oth-
erwise liquid might be ejected. For speed
settings of less than 10, the blender jug 5
may only be filled up to a maximum of
3 litres.
Insert seal 22 correctly (see "Cleaning,
checking and replacing seals" on
page 31).
Insert (see "Cleaning, checking and re-
placing seals" on page 31) new seal 22.
Select speed setting 0 - 3 (see "Setting the
speed" on page 17).
Remedy unnecessary, since not harmful to
health.
Set temperature to 0.
Follow the instructions on the screen.
GB
33