Screen; Basic Operation - Silvercrest MONSIEUR CUISINE CONNECT Operating Instructions Manual

__317552_MC-Connect_GB.book Seite 15 Donnerstag, 21. März 2019 10:53 10

10.3 Screen

The touchscreen 8 shows all settings and operating values.
In sleep mode, the screen is dark and uses less energy. The
device is switched on with the on/off switch 7.
If no function is active and no operation takes place for ap-
prox. 5 minutes, an acoustic signal will sound. In addition,
a dialogue box appears in the touchscreen 8 in which the
time until switching to sleep mode is counted down.
• Press the button on the dialogue box to keep the de-
vice active.
• If the device is in sleep mode, simply press or turn the
control dial 9 to wake up the device.

10.4 Basic operation

This section explains general operation. Exact descriptions
are given in the individual chapters, where they are rele-
vant.
The control and setting of values is carried out via the
touchscreen 8 and the control dial 9.
The screen
The touchscreen 8 responds just like a smartphone, simply
by touching the surface. It is not possible to use the touch-
screen when wearing gloves.
In order to operate properly the screen must be kept clean.
Therefore, do not touch the screen with wet or sticky fin-
gers.
60 6 55 3
MINUTES PORTIONS FACILE MINUTES PORTIONS LIVELLO
• Settings are made by touching buttons or swiping.
The control dial
• Use the control dial 9 to adjust settings. The settings
are usually displayed immediately on the touch-
screen 8. For example, you can scroll through lists or
select menu items by turning the control dial.
• Settings are always only made for the activated func-
tion (for example, time, temperature or speed of the
program).
• Pressing the control dial activates the marked function.
50 4 33 0
MINUTES PORTIONS LIVELLO MINUTES PORTIONS LIVELLO
The display dial
00:00 0
In these instructions, the three circles shown in the above
figure are called display dials. These include buttons as
well as display surfaces and control dials - hence the name
display dial.
The display dials are speed-dependent; turning the control
dial quickly causes a faster - disproportionate - change in
the displayed values.
• The display dials each consist of three different parts:
- 00:00: these and other displays indicate the current
or the adjusted value.
- Status display: the status display around the display
dial shows the relative size of a setting.
- Symbols: the symbols (e.g.
basic function the display dial has.
p
00:00 0
• The display dials have different functions:
- Press and turn: with your finger, trace the outer edge
in a circle. The values are changed and displayed.
- Display of the respective values. In the figure above
the values displayed are the time, the speed and the
temperature.
Turbo Anti-clockwise
• Pressing any of the three buttons switches to the func-
tion named below the button.
0
°C
0
) indicate which
g
0
°C
0
Weighing
GB
15