Download Print this page
Backyard Discovery FARMHOUSE BENCH Owner's Manual & Assembly Instructions

Backyard Discovery FARMHOUSE BENCH Owner's Manual & Assembly Instructions

Advertisement

Quick Links

FARMHOUSE BENCH
MANUFACTURED BY:
Backyard Discovery
3305 Airport Drive
Pittsburg, KS 66762
Model # 2006638
Owner's Manual & Assembly Instructions
800-856-4445
average 2 person assembly time
assembly time may vary based on skill level
For the most up to date assembly manual,
to register your set, or to order replacement parts please visit
www.backyarddiscovery.com
SAVE THIS ASSEMBLY MANUAL FOR FUTURE REFERENCE IN THE EVENT THAT
YOU NEED TO ORDER REPLACEMENT PARTS.
Made in Malaysia | INS-2006638-B-FARMHOUSE BENCH-ENG 2/12/2020

Advertisement

loading
Need help?

Need help?

Do you have a question about the FARMHOUSE BENCH and is the answer not in the manual?

Questions and answers

Summary of Contents for Backyard Discovery FARMHOUSE BENCH

  • Page 1 For the most up to date assembly manual, to register your set, or to order replacement parts please visit www.backyarddiscovery.com SAVE THIS ASSEMBLY MANUAL FOR FUTURE REFERENCE IN THE EVENT THAT YOU NEED TO ORDER REPLACEMENT PARTS. Made in Malaysia | INS-2006638-B-FARMHOUSE BENCH-ENG 2/12/2020...
  • Page 2 Owner’s Manual Safety Warnings and Maintenance Instructions WARNING IT IS IMPORTANT TO CHECK AND TIGHTEN ALL HARDWARE AT THE BEGINNING AND DURING THE SEASON AS THEY MAY LOOSEN DUE TO WOOD EXPANSION AND CONTRACTION. Wood is NOT f l llame retardant and will burn. Grills, f i rire pits •...
  • Page 3 About Our Wood Your Backyard Discovery product is made out of 100% Meranti wood. Although we take great care in selecting the best quality lumber available, wood is still a product of nature and susceptible to weathering which can change the appearance of your set.
  • Page 4 Owner's Manual Basic Setup Dimensions & Assembly Notes 46 1/4" 13 3/8" 18 1/8" 41 1/2" 13 3/8" NOTE: NOT TO EXCEED 600 LBS Important Assembly Notes 1) While assembling unit, take time before and after each phase to make sure unit is level. If unit is not level, assembly will be difficult and improper assembly may result.
  • Page 5: Assembly Instruction

    ASSEMBLY INSTRUCTION HARDWARE: (x1) CROSS DOWEL TOOL (x2) BENCH UPRIGHT H100842 FLATHEAD SOCKET CAP SCREW (x1) M6 x 60 BENCH PANEL H100841 WASHER FLAT 6x15 (x1) ALLEN WRENCH (x2) (x1) H100817 WOOD DOWEL CROSS DOWEL 8mm x 30mm BRACE (x2) SCREW - 60mm H100822 CROSS DOWEL...

This manual is also suitable for:

2006638