10 Maintenance
Fig.81
6
Fig.82
7
Fig.83
8
86
6. Disassemble the different parts of the mud pot.
The magnetic particles stuck inside the filter body will drop to the
bottom.
MW-1001313-1
7. Clean the various parts with clean water.
MW-1001314-1
8. Refit the sludge collector.
Caution
Risk of breakage.
Observe the keyway of the plastic part: align the notch with the
pin.
Replace the seal if necessary.
Check that the seal is correctly positioned before tightening with
the key (supplied with the indoor unit).
9. Open the stop valves and reactivate the water supply to the appliance.
10. Re-commission the appliance.
MW-1001315-2
7762758 - v05 - 19082020