Table of Contents
Advertisement
Chapter 4. Maintenance
4.2
Removing Transducer (cont.)
5. Remove the bolts that fasten the simple/barrel/flange holder to the nozzle flange, and remove it from the pipe
nozzle.
6. Install a new flange gasket on the pipe nozzle. Then, fasten the "blind" flange to the pipe nozzle with the bolts
removed in the previous step.
7. Repeat steps 3 through 6 for the other transducer if necessary.
You have completed the removal procedure, it is now safe to reopen the process line.
30
Bolts
[no content intended for this page]
Bolts
Gasket
Blind Flange
Model T9 Ultrasonic Flow Transducer Installation Guide
Advertisement
Table of Contents
