Chapter 3. Inserting T9 Transducers into the Pipe
3.2
Inserting Transducers with the Simple Holder (cont.)
2. Insert the holder into the pipe nozzle. Place a spiral-wound gasket between the nozzle and the holder. The nozzle
length determines the transducer face position.
Transducer Head
Nozzle
Gasket
Pipe
3. Bolt the holder flange onto the nozzle flange as shown below.
Bolt
Washer
Washer
Nut
Nozzle
Pipe
16
Model T9 Ultrasonic Flow Transducer Installation Guide