GE T9 Installation Manual page 28

Chapter 3. Inserting T9 Transducers into the Pipe
Inserting Transducers with the Barrel Holder (cont.)
Procedure for Inserting Transducers with the Barrel Holder (cont.)
2. Insert the holder into the pipe nozzle. Place a spiral-wound gasket between the nozzle and the holder. The nozzle
length determines the transducer face position.
Barrel Holder
Gasket
Nozzle
Pipe
3. Bolt the holder flange onto the nozzle flange as shown below.
Bolt
Washer
Nut
Nozzle
Pipe
20 Model T9 Ultrasonic Flow Transducer Installation Guide